Slot for the holders with your own hands: instructions and photos

Nest for chicken bearers is a very important part of the arrangement of any chicken coop. Birds in the wild also make for themselves comfortable places where children will grow later. That is why, if you make a comfortable nest, the eggs will not be scattered around the poultry house. And you will be able to control the performance of your bootloaders by

.

Contents

• 1 Description
• 2 Instructions for making
  • 2.1 Normal
  • jack 2.2
  • jack
• 3.9 Egg receiver

3 Video "Sample homemade egg receptacle"

Description

For those who have been breeding and keeping home for a long timechickens, know that in the presence of nests and eggs more, and their quality is better. Such a seemingly insignificant thing in the poultry house prevents the opening of products and contributes to their cleanliness.

Before you begin to make a comfortable place for eggplant, it is important to think about its placement. The fact is that chickens will be in it if it meets some requirements

.

The jack should not be in sight, it is desirable to highlight a small dimming corner and put it there.

It is not desirable to get a lot of light in the slot.

Place eggplant should be dry and warm, so find this place in the poultry house and lay straw or sawdust.

Do not place the masonry on the ground, it will be damp and cold. Approximately 30 centimeters from the ground - the ideal height of the nest.

Production Instructions So, each of us imagines what a chicken soup should look like. This is a small box or basket with straw or sawdust. It is here that a comfortable place can be arranged for their holders by each host. If you do not have the appropriate box, it is easy to make from plywood, board or other relevant natural material.

Many breeders ask: how many should be nests for a certain number of hens? It is clear that at the same time all birds will not have to carry, but two or three can still take their cozy places. It is believed that one socket should be on five sockets. Accordingly, if you have 15 chickens, then there should be three places for the masonry.

One more important point is that everyone should be well used to their place. It happens that the owner changes the location of the nest, and all the chickens also roam in the usual corner. That is why, before placing it, consider everything well, and predict whether it is convenient for birds to stay in it for a long time. If you are only going to start the chicken, familiarize them with the place of masonry in advance.

Normal

Slot To make this option you do not need much power or material. As an example, you can take a regular box of vegetables. Exactly the size of a masonry place for easy plywood. Put hay or straw on the bottom - and here's one nest already ready.

If you have a large economy, it is expedient and very convenient to make masonry places in the form of a battery. They are also very easy to make at home, and most importantly from hand tools.

For this you need:

Take a long board or plywood, divide it into three parts.

Then, on each part, construct the sides.

Place the nest with straw or hay and put it at a comfortable distance from the floor. Along the way to make a ladder to lift the

The

slot Do you ever make a booth for your little dog? If so, then you will not be able to make a nest for chickens with your own hands.

Making

Make a simple, comfortable sized chicken box without a front wall.

In a continuous plywood or board, cut a small round hole for the bird's passage

Insert the front wall, put the bedding.

As you can see, everything is quite simple. Exactly on the same principle you can make a battery jacks, as in the photo.

Nest of

eggplant

It's very convenient to have chicken egg laying mushroom laying, especially if you do not have the opportunity to check the nests regularly for the day. In addition, it is not difficult to make his own hands. All that is needed for this is only the availability of materials and a bit of time. The main difference between such a device is the presence of a bottom with a slight bias. For him, the egg will roll into a pre-prepared tray.

Process of manufacturing

We make an ordinary chicken box or booth.

Instead of the usual flat bottom, we set a slightly tilted surface, sufficiently 10 degrees.

Down under the sloping bottom, make a hole and attach the tray. To do this, you can use any plastic container, for example, an extension tray from the refrigerator.

Do not cover a lot of litter so that the egg can roam freely. But to lighten the drop in the tray, place a soft cloth or sawdust.

As it looks in practice, we suggest to look at the drawing.

Scheme of the nest with an eggplant

Here is an ovipositor nest ready! Chickens have a good place to bear, and now you will surely be sure that each egg will remain in the integrity and safety. Good luck!

Video "Sample Homemade Nest with Egg"