Animal Care

Pattern of a combine for a dog: in full size, with his own hands

Pattern of a combine for a dog: in full size, with his own hands

Today, you can often meet people walking on the streets of their pets, dressed in overalls. The cost of such overalls in the store is high enough. Therefore, if you decide to remove your pet, we suggest sewing the overalls.

  • Printout key elements of the
  • Preparation of materials and tools
  • Manufacturing and connection of main components
  • Insert zipper with
  • strap Attaching to the neck, collar stand
  • Useful video on the topic
  • Finishing finishing
  • Editing a pattern size
  • Possible problemsat the stage of cutting
  • Overalls in the field of the abdomen and chest
  • Overalls short on the sides
  • Narrow coverage of pants in the overalls of the
  • Finishing pre-primCountry

Pattern coveralls coveralls dog is universal. It is perfect for dogs, whose proportions are close to the "square".This is york, snautserie, poodles, terriers, etc. For such breeds, it is enough to simply download the pattern. For breeds, with a more stretched body shape, a pattern will need to be adjusted slightly( the instructions detail how to do this).

You will need only one measure - the length of the body. This is the distance from the edge of the base of the tail to the edge of the collar( in a specific case, 47 cm).

The product consists of four parts:

  • side panels - 2 pcs.;
  • bottom insert for chest and stomach - 1 pc.;
  • gate - 1 pc.

Printout key elements of the

pattern To execute this point, there is a fairly basic knowledge of the office software:

  • , download the two patterns below( right-click on the link, choose "Save as. ..", specify the path);
  • copy the elements of the pattern and paste them into the ms excel document;
  • click on the picture, in the menu select "Size and Properties";
  • to set the checkbox - "scale in width and height" - 100% in the input window;
  • press the Print button or the hot keys CTRL + P.

Software decompresses and prints a template. Take glue and scissors, fold and glued it.

The original size of the dog overalls:
Pattern of a combine for a dog: in full size, with his own hands

Second Scheme:
Pattern of a combine for a dog: in full size, with his own hands

Preparation of materials and tools

At this stage you need to stock everything you need to work:

  • main fabric( for these measurements a cut of 120 cm * 150 cm( D * W));
  • fabric for a warm substrate( you can make a removable and use as a padding);
  • chalk or pencil for cutting;
  • collar buckle( button or button);
  • lavsan thread;
  • eraser - 2 m( you should prefer a round gum, it is less stretched in a sock);
  • zipper on the length of the back( the tractor clasp has excellent durability properties);
  • cotton batting;
  • scissors;
  • centimeter.

When choosing a fabric, it will better resist lightweight fabric with a water-repellent effect. The most suitable option is a membrane material, the lower layer of which consists of a loose perforated film glued to the base. To save time for seam processing, it is advisable to choose a cloth whose edge does not creep and does not bite.

As a substrate it is better to use smooth materials( satin, twill, etc.).Apply a grid is not worth it, it can clap and damage the hair, delivering discomfort to the dog.

Production and connection of main components

Transfer the pattern to the material. For this purpose, the fabric should be folded in half outwards outward. On top, put a sample of sidewall. In order to avoid distortion of the finished product, it is necessary that the line of the back is parallel to the partial thread of the fabric.

Insert the bottom insert with a dashed line along the bend. Templates are pinned or marked. The fixed pattern is drawn by chalk taking into account small allowances( 0.5 cm - 1 cm) on the seams. After the pattern is transferred to the fabric, we evaluate visually and cut.

For fidelity, it is desirable to first manually read the product to try it on the pet. It is necessary to start the sewing from the sidewalls. First weave together leggings. Particular attention should be paid to the pins on the back. They are laid in the center, protruded along and across to the strength( length of the spit 7 cm).Next, connect the side panels by sewing the lower insert, which closes the stomach and chest.

Prepared parts are draped by a linen seam( used for sewing bed linen, sliders, etc.).

It is the most suitable because:

  • is solid;
  • edges do not require additional processing;
  • eliminates wool confusion.

Take off the benchmarks for a dog suit with your own hands:
Pattern of a combine for a dog: in full size, with his own hands

Insert zipper lock with

strap. Zipper zipper is sewn along the back. It must be taken into account that it is more convenient if the movement of the lightning bolt is carried out from the tail to the neck. The zipper, of course, needs a strap. We cut it from the main material, inside the bar inserted insecure batting. If you need a completely waterproof version, you can make a valve. It eliminates the hit of moisture in the middle of a combine in rainy weather.

Planck performs the following functions:

  • provides product rigidity;
  • facilitates clamping;
  • helps to avoid discomfort and friction on the back of the skin.

Then cut the rectangular strip. Its dimensions are 10 cm * the length of the back + stock 2-3 sm( to go to the gate and hide the edge of the fastener).Fold the finished strip along, but not in the middle, but with a shift( it is necessary that the lower part was 2 cm wider than the upper one).That is, the lower part is 6 cm, the upper part is 4 cm. This gap will allow the zipper to wrap from the reverse side, hiding its edge and batting. The same will solve the problem of "sherste-selective".

Lightning should be shorter than the bars on both sides. The part of the bar that serves, puts the edge in the edge over the reverse side of the sidewall along the back and sew. Then, having folded the front, sew the zipper and the hut. Expand the seam inside and overlay with an additional fixing seam at the edge of the lightning. The second part of the castle is sewn the same way, only without a strap.

If the dog is walking in the collar, then the jacket provides a hole for the leash. If the dog is walking on the helmets, then the bar is more appropriate to make long.

Joining the neck, collar rack

The collar stand is trimmed similar to the strap. This is a rectangle whose width is 10 cm, the length is equal to the length of the mouth of the neck. In the end result the width of the rack will be 4 sm. Inside, the collar is fixed with a special adhesive lining. Next, the part is folded outward twice, the shorter edges are stitched. After the collar turns out, and, taking a 0,5 cm retreat, the line is laid along the seams on the front side. If the neck volume of the nurse is much smaller than the mouth of the neck, then it is necessary to make a protuberance, or to scrape the fabric to the required size.

The edge of the perimeter and edge of the collar is formed by the faces and rubbed off. The collar turns out, the seam is fixed by an additional line and processed by the overlay. A button / button is sewn on one edge of the collar, on the other - an elastic loop or cloth / button.

Useful Video by Theme

Finishing Finishes

The bottom of the pan is twisted twice, an elastic band inserted. If you need to adjust the width of the bottom of the trousers in a situation, you can replace the gum with a non-widescreen wicket with a lanyard or a cuff with a clip. You can also handle the edges with an elastic braid.

Cutting the hole is handled with a ribbon and an elastic band so that the overalls are as close as possible to the dog's body. The dog needs another obligatory hole - for a cappella, so that he can normally cope with need( cut and treated in a similar way).

Editing the size of the

If the length of the back of a four-legged friend is more or less than 47 cm, it is enough to make a simple calculation:


- the length of the back of your pet;

M is the percentage number that is displayed in the zoom window in the ms excel file.

For example:

If = 50 cm, then M( according to calculations) = 50 * 100 47 = 106,4

It is advisable to first sew a "trial" overalls from an old undercoat or a sheet. It insures you from damage to the main material, helps to detect errors in the verse, since each dog is unique, it is impossible to create a universal template.

Possible problems at the

cutting stage If your pet is not quite standard in size, the following nuances may occur:

  • wide, long, short or narrow front legs;
  • dropped lower insert;
  • divergence of the length of the step and stepping seam.

In this case, extra individual measurements are taken to correct the pattern. The dog must necessarily bring in a standing position. Centimeter tape does not stretch, otherwise, the dog will be uncomfortable and tightly dressed.

Additional individual measurements:

  • semi-neck( NEH);
  • Breast Impression( PGH);
  • Half Hip Hop( PUPPY);
  • lateral length( DB) - measured on the side of the abdomen between the hips and shoulders.

Ankle close in the abdomen and chest

We calculate the height of the sidewall( WB):

WB =( 2 * POG - insertion width) *

As a result, we get a value that is attached throughout the length of the back. This type of adjustment of the pattern threatens the enlargement of the neck. To reduce it to the required size, it is necessary to assemble the fabric of the width of the fabric or to use pull-outs located at the level with the trachea.

Short overalls on the sides

We retold a few centimeters of the front and back legs from the neck and hold two perpendicular lines from the extremities of the abdominal line upwards. Following it, we cut the template, push the side panels so that the distance between the cuts for the paws was equal to the length of the side line and a couple of centimeters( stock).

Along with the length of the side chest, the length of the back is increased. This can be corrected by drawing the protrusions at the place of the cut. In the future, they will allow the pet to feel more free in the overalls.

Narrow covering of legs in a suit

It is possible to extend the reach of the legs by adding equivalent segments along the suture B on both sides.

We calculate the increment( P):

P =( 2 * WINNINGS - the length of the seam B) *

Next, we shift the sidewall pattern to the width P back and add the centimeters to the required amount to the front edge of the leg.

The final pre-fitting of the

overalls All corrections and corrections have been made, now you need to re-sew a test piece of fabric that is not unfortunate. While emphasizing, we focus on the length of the legs, if necessary, adjust. Also, you need to definitively decide with the cuts for the tail and the genitalia. They are schematically applied by a marker on a trial copy to the specimen. All corrections are duplicated on the verse.

As a result, you will be able to sew your own suit overalls, in which your pet will sit comfortably, walk, jump, run and play. It will be exclusive, not serial, and will benefit your pet from the crowd advantageously.