Dumpor.com

Repair Of

Installation of clinker thermopanels

The facade of the building is a business card of the whole house, as it contributes to the impression of all buildings. For this reason, external processing is one of the main stages of construction. However, the finishing material should meet not only the aesthetic requirements, but the

and be practical, to perform protective functions. One of the varieties of finishing materials that meet these requirements is thermal panels. Today they are divided into four types: PC-1, PC-2, PK-1F and PC-2F.These products are distinguished by the size, color, texture and parameters of the frost-resistant tile. Let's consider the more specific features of each type, as well as the method of mounting the thermopanels.

Contents

  • Structure and features of the material
  • Installation technology
    • Calculation of material
    • Construction of the roughness
    • Window cuttings processing
    • The process of installation of thermal panels
  • Rules of storage and transportation

Composition and features of the material

Clinker thermal panels are products that contain in its composition insulating and finishing material, as well as wood chips or marble crumb. All layers are tightly fastened, resulting in a solid construction. Consider the constituent components in more detail:

  • The thermal insulation properties of the panel are acquired due to the presence of polyurethane foam. PPU has a resistance to the effects of various dyes, solvents, glue warehouses. Also, this material is characterized by a long lifetime. Over time, it can not be destroyed, rotting and defeating the fungus. In addition, the PPU is difficult to ignite.
  • The second component of the panel is a clinker tile. It is manufactured by two methods:
    • by extrusion;
    • by means of dry pressing.

    The best quality is tile, which is made by the second method, because it differs more expressed functional and aesthetic qualities. As a material for the production of products use a special red or ordinary clay.

  • The third component of the panel is made of marble crumb or pressed wood chips. Due to the presence of this layer, the finishing material acquires the necessary stiffness. Cod is made from softwood species - larch, pine and fir. This material has good thermal insulation qualities.
  • When choosing panels, it is necessary to take into account the surface of the walls of the house, as well as the features of processing angles and window openings. On the thermopanels, which relate to the types of PC-1 and PC-2, the mounting places are located on the built-in metal profiles. These products should be installed on gratings or on walls with as much surface as possible. Thermal panels such as PC-1F and PC-2F are more versatile. The presence of a grid is not a prerequisite for the installation of such products. They can also be used on all surfaces.

    Clinker Thermalpanels. Photo:

    Installation of clinker thermopanels

    Installation of clinker thermopanels

    Installation of clinker thermopanels

    Advantages of facade panels:

    • high strength indexes;
    • long service life;
    • thermal insulation effect;
    • high-quality soundproofing;
    • is affordable;
    • wide range of colors;
    • a large assortment of textures variations;The
    • is lightweight, which greatly facilitates the installation;
    • environmental safety;
    • reliable waterproofing of surfaces;
    • presence in the panels of special plastic guides, which prevent deformation of the material.

    Clinker facade thermo panels can significantly extend the service life of the building. Application of these finishing elements allows you to save space inside the house, and the facades, decorated with thermopanels, do not require additional care. Also, these elements protect the walls from moisture. Even with abundant rainfall, the integrity of the treatment is not disturbed and the material does not lose its protective qualities.

    Today, one of the most popular types of clinker thermopanels is the products in their appearance are reminiscent of the brickwork. The popularity of such facing material is explained primarily by its aesthetic properties. The treatment, done with the help of a tile, imitates the brick, visually resembles a real masonry.

    The installation process does not take much time and is carried out in the shortest possible time. The insignificant weight of the panels gives the opportunity to perform work on the walls, have a weak bearing capacity. Also, due to a small mass of material, the load on the foundation is practically absent. This advantageously distinguishes the clinker thermal panels from the analogues that aggregate the structure. It is recommended to use special thermo panels to handle the cap.

    The installation of clinker panels can be done at any time of year. There are no so-called "wet" processes in the mounting technology. At the plus temperature, only the final stage of work is performed - zatryka. But if necessary this procedure can be postponed for a certain time.
    Installation of clinker thermopanels

    Installation technology

    It is quite possible to carry out the facade treatment with the help of clinker panels. To do this, you only need to carefully read the sequence of work. Panels are installed on the surface of any material. It may be a wooden wall, brickwork or stone. Thanks to the light weight of the material during the installation, no supporting structures are required, as well as any earthwork.

    Tools and materials required for mounting works:

    • perforator;
    • Bulgarian;
    • screwdriver;
    • level;
    • spatula;
    • dowels;
    • mounting foam;
    • screws;
    • gum mix.

    Calculation of material

    First of all, it is necessary to determine the required amount of material. You can do this as follows: measure the area of ​​the working surface, as well as the size of door and window openings. From the index obtained as a result of measuring the area of ​​walls, it is necessary to subtract the parameters of the slots. As a result, the total area that needs to be treated will be obtained.

    Based on this result, the required amount of finishing material should be determined. After performing the necessary calculations it is necessary to purchase the appropriate quantity of mounting foam and silicone sealant.20 thermopanels consumes 1 foam and 1 sealer seal. The mortar should be bought at a rate of 2 kg / m2.

    Installation of clinker thermopanels

    CONSTRUCTION OF

    GRINDER Installation of clinker thermal panels is carried out in two ways:

    • on a grid;
    • directly on the wall.

    The choice of mounting option depends on the degree of surface preparation of the walls. If the working base is fairly even, the mount can be carried out without auxiliary constructions.

    In the presence of irregularities and various deformations on the surface of the wall, it is necessary to install a wooden bead trim. You need to base them so that each panel is placed on three bars. In the process of fastening bars between them it is necessary to observe a distance of 40-45 cm. Since wood is not resistant to the action of various negative factors, before installing the bars, the laths should be treated with antiseptic and flame retardants.
    Installation of clinker thermopanels

    Treatment of window openings

    It is also necessary to determine the method of processing the corners of the house and window openings. You can process it in several ways.

  • One of them is the sawing of the panel at an angle of 45 °.This method is economical, so it is the most popular. Sawing is carried out in production conditions using special equipment. As an advantage of this option, one can also highlight the achievements in the process of mounting the effect of the completed brickwork. In this case, there is no need for mounting an insert that needs to be fastened when using the finished corner parts. In the process of installing corner elements, the angles are first mounted, followed by panels.
  • One more treatment option is the use of clinker overhead corner parts. In some cases, this method is better because the corners of the house become especially aesthetic and relief. For fixing of overhead clinker elements a special tile gluing structure for facades is used. This method of processing provides the opportunity to select different invoices and colors and achieve the most optimal design solution. Such elements protect the corners from the negative effects of low temperature and prevent freezing.
  • The third way of processing is to use elements of small fractions of natural stone or special decor on the basis of polyurethane foam. Also for this purpose are used special parts on the polyurethane foam, which are made in one bricks.
  • Installation of clinker thermopanels

    The process of installing

    thermal panels The installation of one thermopanel requires six or more self-tapping. The panels have grooved-comb combinations, making the joining of the elements easy enough. If necessary, the material can be cut using a power tool. This allows you to easily fill the arched elements. Also during the installation of the joints need to be treated with a silicone sealant to prevent moisture from entering.

    The process of installation of thermopanels is carried out in the following order of action:

  • Along the base there is a line on which the aluminum profile is mounted. It should be fixed 20 cm below the floor level. In order to keep the structure intact, the base should not be placed close to the shaft, between them need to leave a certain distance.
  • Vertical beacons are mounted on the facade. If you need to put a piece of the panel in the ground, you can not install the base profile. In this case, a steel corner or wooden beams is used to form the support at the time of installation.
  • Installation work must start from the left corner of the house. The panels are stacked in rows from left to right.
  • Products are installed on an angle based on the mounting rail or profile. Fixation is carried out using dowels or self-tapping screws.
  • The joints between the panels are filled with polyurethane foam.
  • After fixing the first row of panels, the space between the wall and the base profile also needs to be filled with foam. This will help prevent air circulation through the material.
  • The stacking of the upper row is carried out in a similar sequence.
  • Then the panels are installed in the same way from the bottom up. Fixation is also performed using dowels, and each element is sealed with a mounting foam. If small stairs are formed in the joints of the panels, it is possible to eliminate this defect using a special gasket.
  • At the end of the installation, the seams need to be rubbed with a frost-resistant composition. This procedure is the final stage of installing thermopanels. But it should be borne in mind that the runoff can be carried out at a minus temperature. If weather conditions do not allow you to rub the seams immediately after mounting, this can be done after a certain time.
  • Installation of clinker thermopanels

    Rules for Storage and Transportation

    The facade panels with clinker tiles during transport should be protected against mechanical influences. To do this, you need to adhere to some simple rules of handling products:

  • Packages with panels can be placed on top of each other. They should be located so that they have the opportunity to read the information on the label.
  • Packaging film is removed before assembly work, it is not necessary to remove it in advance.
  • It is necessary to store the packaging on an equal surface, and they must be located horizontally.
  • In an unpacked state, the material may not be longer than 10 days.
  • The effect of ultraviolet rays on the panel is highly undesirable, so during storage, the material should be protected from exposure to the sun.
  • Thus, thermal panels with clinker tiles represent a universal finishing material. Along with high aesthetic performance, these products have a number of practical qualities. The facade, decorated with the use of such panels, acquires an attractive appearance, as well as thermal and sound insulation properties. In addition, the finishing material is safe for health and is resistant to various negative influences. The installation process is accessible and does not require special training or professional knowledge.

    How to fix clinker thermal panels on video is shown below: