Darsonvalization at home. Methodology of the procedure
- 11 Oct 04:00
- Body Care
The electrode must be carefully inserted into the glass tube base. In the contact method, the glass electrode smoothly drives through the skin. When the procedure begins and ends, in order to avoid the appearance of a spark base is recommended to hold the electrode with your fingers.
You can also useto treat the skin through a sterile gauze or paper napkin. Dry skin, greased with cream, treated for 2-3 minutes, greasy, sprinkled with talc, - 5-8 minutes. Try to avoid touching the patient with hands so that there is no spark discharge.
Skin can be treated with alcohol lotions, as they can ignite from the spark that triggers the flash!
With a remote method, the electrode, as soon as it reaches the pustule, is separated from the person, with the formation of a spark discharge that bites the skin. It can also move around the skin at a distance of 0,3-0,5 mm from the skin, without contacting it, to create the effect of lifting - lifting.
For hair loss treatments, use a comb screw, which should be driven at intervals for 3-7 minutes. It stimulates blood circulation and causes irritation of hair follicles, which pass from the phase of fading to the active phase. The course of treatment is 10-15 procedures, which are carried out every other day.
Private Darsonvalization Techniques
- Darsonvalization of the Acne of the Head
The procedure is carried out in a seated position. From hair you need to remove all metal-containing items( hairpins, etc.) and comb your hair. Grebeshkovym electrodes slowly and smoothly conduct the hair part of the head from the forehead in the direction to the neck. With a short haircut you can drive an electrode and in the opposite direction. The effect is carried out within 8-10 minutes, with low power, every day or every other day. The course consists of 20-30 procedures.
- Darsonvalization of the century
The procedure is carried out in a sitting or lying position, the head should be fixed head restraint. Method of contact.
Electrodes of a cylindrical or conical shape are smoothly driven by the skin of the century( eyes are closed).Power is small. The procedure is carried out every day or every other day. Starting from 1 minute, gradually increasing( each procedure for 1 minute) and bring up to 5 minutes. Course-15 procedures.
- Darsonvalization of the face of the face
The position is sitting or lying, the head is fixed with a head restraint. Depending on the testimony, the method can be contact or distant. The mushroom electrode makes slow circular motions smoothly moving it from the forehead to the nose and chin alternately on one and the other half of the face. Procedures are carried out daily or in the daytime of 5-10 minutes, power average or high( on indications).The course is 15-30 procedures.
- Darsonvalization of the collar area
Position - lying, but better sitting. Mushroom electrode make circular motions, starting from the collarbone in front and up to the 6 th thoracic vertebra in the back. Method is remote, small air gap. The procedures are carried out every day or every other day, for 10-15 minutes, the average power. The course is 10-15 procedures.
- Darsonvalization in case of skin damage( wounds, ulcers, germs)
Comfortable position. The choice of electrode depends on the size of the affected area. If the wound is large, use a mushroom electrode. Initially, within 3-5 minutes, the skin surrounding the focal point of damage( radius 5-8 cm) is influenced on the skin, then 1-3 minutes immediately affect the hearth, and the conclusion for 3-5 minutes - to the corresponding area of the spinal cord. If the wound is tight, then the procedure is carried out immediately after dressing, and the electrode moves along the bandage surface. At the day when ligation is performed, it is necessary to influence the wound for 10-12 minutes, the strength is small or average. The course is 10-15 procedures.
- Darsonvalization of warts
Conducted by the remote method. The inner cavity electrode holds over the place of skin expansion, keeping an air gap of 1.5-2 cm. Influence is carried out once every 5 days, high power. The course is 3-5 procedures.