Dumpor.com

Sanitary Engineering

Independent installation of a towel dryer in the bathroom

Towel warmer is an indispensable attribute of bathrooms in most of the apartments and private homes. The role of this heat exchanger, based on the principle of work similar to that of heating batteries, is not only to dry towels or linen, but also the creation of a comfortable

microclimate in the bathroom. In addition, in a room that is sufficiently warmed, there are no prerequisites for high humidity and the formation of a fungus. There are two types of towels - electric and water. The connection of an electric appliance takes less time than the installation of a towel dryer, which must be connected to the heating network or the hot water supply system, but the heat exchanger is less reliable from the mains. And is it worth to install an extra electric appliance in a room where there is high humidity?

Still, a more traditional and safe design for towel drying in the bathroom remains a water towel warmer, and then we will talk about how to install this heat exchanger on its own. Of course, professionals can be involved in this work, but those who are limited in funds will need this instruction. It will help you learn how to connect a towel rack without the invitation of specialists.

Independent installation of a towel dryer in the bathroom

Types of water towel dryers

Not so long ago, almost every bath towel was made of ferrous metal. These devices did not differ in aesthetic appearance and durability. However, lucky ones with useful acquaintances could install a towel rail, made of stainless steel pipes. Today, a number of companies are releasing these heat exchangers at the industrial level, and the towel rail can now serve as a designer element of the bathroom. Despite the variety, the devices are mainly made of stainless and brass seamless tubes that withstand a fairly high supply of hot water. In addition, there are a variety of forms of water towel dryers, but most appliances have a M-shaped configuration. Also, in an incredible amount of water heat exchangers for the bathroom, the ratio of the sides is 500 to 500 mm.

There are 3 types of water towel accessories: side, bottom and diagonal. The installation of a coil in most cases is carried out in such a way that it can be mounted in the first of three ways, as most 500 to 500 mm heat exchangers are connected to the ports of a vertical riser.

What should I consider before installing?

Experts believe that mounting a stainless steel towel is a better option than installing a brass coil.

Steel construction is more durable, designed for higher working pressure, and the connection of a gun with iron can be carried out without fear, which later metal device will create galvanic pairs with shut-off valves.

Independent installation of a towel dryer in the bathroom

Before installing a towel rack, it must be taken into account that the diameter of the pipeline must not be less than the diameter of the riser to which the coil is connected. For example, if the diameter of the hot water pipeline is 1 inch, then the cross section of the towel should not be less. However, the mismatch of the diameters can be fixed by installing the bypass line. With the help of the sliced ​​into bypass valves, it is easy to adjust the amount of hot water supplied to the coil. In addition, the bypass connection will leave the line in operation even when the towel dryer in the bathroom is removed. The sum of pipes diameters bypass and coil must be equal to or greater than the diameter of the main riser. It is worth noting that the vertical lines of hot water in its section do not exceed 1 inch, and the industry produces 500 to 500 mm towels made of tubes, whose diameter is about 2, 1 and 1¼ inches.

To install a towel warmer without delay, prepare fittings, three valves or ball valves( for water inlet and outlet from the water towel and jumper), sealing elements and fasteners for reliable fixing of the coil on the wall before work. If the old heat exchanger is tiled into the heating system of an apartment building, then its replacement for obvious reasons is better to hold in the summer. The connection of the towel can extend for several hours, and the overheating of the heating network in the winter, even if it is agreed with the housing and communal services, is fraught with consequences. By the way, this is a powerful argument in favor of installing the bypass line or connecting the towel to a hot water pipe, which, moreover, operates almost a year.

Performance of the

So, neighbors are warned, the shutdown of the pipeline from the housing and communal services is agreed, you can get started. Often, especially in the old house, the water towel warmer is an integral part of the riser, so it will have to cut off the angle grinder. Valeria, whose diameter is selected in accordance with the section of the ends of the pipe, is threaded, after which the clutches, tees, sleeves or corners will be screwed( depending on where the towel rail and jumper will be installed).It is not superfluous to use a cutting tool and when restoring the old thread on the pipe, if the dismantled heat exchanger was connected using fittings.

Independent installation of a towel dryer in the bathroom

The next stage is the installation of threaded elements, bypass installation and cocks or valves. All connections must be sealed: either a proven practice of more than a decade of traditional winding, or modern sealing agents that are easier to apply and provide high-quality sealing( silicone sealant, FUM, etc.).Before installing shut-off valves, it must be checked for leak tightness. This is done very simply - in the closed crane is poured water, and if the fittings are working, the level of fluid in its body is not reduced.

It remains to attach a towel rail to the wall and fittings. In order to mark the mounting points of the device to the wall panel, it must be connected to the prepared pipeline. After marking the heat exchanger is dismantled. To install the towel, brackets, clamps or other owners are used, often included in one set with a heat exchanger. Fixing it on the wall remains to connect the towel rail to the locking fittings. It should not be forgotten when installing the sealing of threaded joints.

Oscillating and connecting

Before commissioning a new heat exchanger for the bathroom, it is necessary to carry out its so-called pressing - after opening the valve on the device, put the water in the riser. Alternately, closing the cranes, make sure that there is no moisture on the joints of the structure. If leakage is detected, measures should be taken to eliminate them. Quite often, the reason for their appearance are weakly tightened fastenings, but it is not necessary to make unnecessary efforts in their tightening, as either fitting or carving can be hopelessly spoiled. If it is not possible to cope with the flow, it is best to again block the water in the riser and try to find out the reason for the leakage, and then remove the water passage.

Installation of a towel bag in the bathroom - though responsible, but not as complicated as it might seem at first. The main rule in its conduct is the reasonable leisure time required to make accurate measurements;Buy not the first-best mixer, but the most suitable for installation;to prepare the necessary tools, fittings, hardware, seals and fittings. After that, the process of connecting the towel will turn into an exciting pastime, the pride of self-fulfilling quality work. More about the choice and manufacturer of towel rails look here.