The main ways in which the plaster for the bathroom is applied
- 31 Aug 16:00
- Repair Of
When performing repairs in the bathroom, a problem often arises due to the fact that plastering the walls in it requires special composition. The applied mass should include cement, not ordinary plaster. In addition, in the solution, which makes theplaster for the bathroom, it is necessary to add a special substance that will enhance the water resistance of the composition, as a result of plaster for the bathroom will be the most durable and reliable. Most often it is a plasticizer, but if you do not want to cook this mass yourself, you can buy a ready-made dry mixture that will only be diluted with water. To plaster the walls in the bathroom with the help of this or that material is necessary after approximately the appearance of the walls will be determined. It can be determined by photo in magazines.
Basic Types of Bathroom Plaster
For rooms where there is an increased level of moisture content, a special composition is required that allows not only the walls to be treated, but also protect them from all kinds of damage and harmful microorganisms.
Plaster for walls in a bathroom, sanitizing type
Plaster walls in the bathroom must have a sinking qualities. Today's market of building materials offers a wide range of data materials, which are filled with all sorts of additives that allow the plaster solution to provide the necessary properties, plasticizers and additives.
A dry pile for rooms is one of the strongest of such mixtures.
Usually does not make the slightest job of preparing a solution. When applying with it, too, there should be no problems. Apart from all this, the plaster hardens quickly and does not crack. After the walls after the complete drying of the plaster will be aligned, it is allowed to lay them tile or tap the walls of the bathroom in about a week.
In addition to the fact that the plaster on the walls in the bathroom, made from a dry mixture, is very convenient in the preparation and application, it also has other important properties. Among them, the following are especially highlighted:
- Excellent protection against water stains that occur every time the soul is turned on. Accordingly, it preserves the base of the house from the deposited salts. Therefore, you do not have to resort to additional treatment of plastered walls with other materials, as the plaster walls in the bathroom is hermetically sealed.
- Prevents the formation of hollow walls in the walls due to the washing of a simple solution.
- Deleting the moisture situation from the inside.
- Excellent insulation, protects the walls of the bathroom.
- Possibility of excellent vapor permeability.
- Exclusion of the possibility of cracks in the drying period and the subsequent use of plaster.
- Plaster for the bathroom is environmentally friendly material, which in no way can negatively affect the well-being of people in the bathroom.
- High strength indexes.
It is important to note that such consistency in no way should be used to apply to previously erected gypsum bases, as well as for waterproofing the base, foundation walls or enclosures surrounding it.
Preparing the primer for applying the plaster in the bathroom
First you need to carefully clean the previous wall covering. No matter what the walls were covered, everything should be removed. After all, the plaster for the room ideally smoothly falls and does not fall apart only when it is attached to a clean and level surface. And in the case when plastering is produced by own hands in a new, just built house, it will be necessary to cope with the cleaning of walls from dirt, bituminous and greasy spots, from dust.
In order to remove paint stains from walls, you need to use a special solvent, a soldering lamp or a chisel. The first method is the least harmful to the surface of the wall, since it does not damage the wall itself. Unlike a solvent, a soldering lamp and a chisel can damage the brick, wood or any other material from which the house is made.
If the walls after this cleaning still become rough, they are treated with sandpaper or a grinder. If you do not have the latter, you can use an ordinary electric drill, which is equipped with a special grinding nozzle.
The old damaged plaster for the bathroom is also removed, as if it is exposed to a new layer, they will both fall apart over time. The plaster can be repulsed with a hammer, a chisel, a chisel and even a nichen. It all depends on what the plaster was applied and in what condition it is located.
Once you fully handle the task, you will need to sculpt the surface of the wall. This process is essential in order to ensure that the adhesion of the solution to the brick wall is inviolable. You can do this with a spray gun or usually a wet cloth to wipe the wall. Then you need to apply a plaster to this crude surface. This will be the first row, so this solution should be liquid and skinny( consistency of sour cream).This is necessary in order to fill existing cracks and joints between the bricks. Apply this solution to the usual paint brush.
Following this, a layer of already dense plaster, which should first be thrown on the wall with separate pieces using a trowel. The final layer of plaster should be not thinner and not thicker than 5 mm. This rule only applies when plaster is applied to a stone wall. If your bathroom is made of wood, then it will be necessary to put on boards and decks of thin wire rails. They will allow the solution to be retained on the wall, as the plaster slides relatively quickly on the wood. Thus, in order to handle the bathroom, perfectly suitable plaster for the bathroom, which can replace not only painting, but also facing the walls with a tile. She protects the wall and makes her beautiful.